We will reply to your message within an hour.
Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.
A dry film keeps the screw from sticking or binding in these inserts during installation.
Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.
Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.
A distorted thread grips the screw to resist loosening.
Inserts come with a through-hole tap and installation tool.
Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.
Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.
These inserts are made to stringent military specifications.
The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.
Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.
The knurled body holds these inserts in place in aluminum and other soft metals. Use an arbor press to install them in untapped holes.
The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.
Install these inserts into plastic parts to create a secure base for fasteners.
With the male threaded end on these inserts, mount components directly to plastic parts.
Made from brass, these inserts are electrically conductive, nonmagnetic, and have good corrosion resistance.
These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.
These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.
Made from brass, these inserts are nonmagnetic, corrosion resistant, and electrically conductive.
The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.
These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.
70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.
The barbed sides keep these securely in place even before a screw is installed.
Also known as Trisert inserts, these cut threads into plastic and have better holding power than press-fit inserts.
Also known as clinch style captive nuts, press these nuts into a drilled or punched hole with an arbor press or similar pressure tool.
These nuts have good chemical resistance and may be mildly magnetic.
These press-fit nuts have a nylon insert that grips threads to resist loosening.
Also known as broach style captive nuts, these nuts have good chemical resistance and may be mildly magnetic.
These press-fit nuts are tin plated to resist corrosion from chemicals and salt water.
These tools include everything you need to install press-fit nuts by hand.
Screw an insert onto these tools and drive them a quarter to half-turn below the material's surface. They're compatible with helical inserts that have a prong.
Place the tip of these tools into installed inserts and push down to trigger the spring-loaded punch to break off the prong.
Place the tip of these tools into an insert and strike a light blow to the tool’s head. Then turn the tools counterclockwise with pressure to extract the insert.
Screw an insert onto these tools and drive them a quarter to half-turn below the material’s surface.
Thread these tools into an insert and turn counterclockwise to extract.
Install Keensert®-style inserts.
Compatible with Tap-Lok inserts.