About Oil
More
About Lubricants
More
Hydraulic Oil
Wear-resistant properties keep hydraulic pumps and equipment working, even in high-pressure systems.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Viscosity Grade | Container | Each | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
ISO | AGMA | SAE | SSU | Size, gal. | Type | Temp. Range, °F | Color | With Detergent | Each | |
Mineral Base Oil | ||||||||||
32 | __ | 10W | 155 @ 100° F | 55 | Drum | -20° to 150° F | Amber | No | 0000000 | 0000000 |
46 | 1 | 10W | 215 @ 100° F | 55 | Drum | -20° to 150° F | Amber | No | 0000000 | 000000 |
68 | 2 | 20 | 325 @ 100° F | 55 | Drum | -20° to 150° F | Amber | No | 0000000 | 000000 |
100 | 3 | 30 | 525 @ 100° F | 55 | Drum | -10° to 150° F | Amber | No | 0000000 | 000000 |
Slide and Way Oil
Formulated to reduce friction and wear, this oil ensures smooth, uniform motion of slides, tracks, and ways. It’s tacky, so it even sticks to vertical surfaces to provide long-lasting lubrication.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Because clear oil doesn’t contain sulfur, it’s safe for the environment and also limits bacteria growth. But it doesn’t resist wear as well as oil with sulfur.
Air Compressor Oil
Reduce wear on rings, cylinders, and other moving parts in most major manufacturers' air compressors.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Synthetic oil lasts longer than mineral oil and withstands a wider range of temperatures.
Viscosity Grade | Container | Each | ||||||
---|---|---|---|---|---|---|---|---|
ISO | SSU | Size | Type | Temp. Range, °F | Color | With Detergent | Each | |
Mobil Rarus 824—Synthetic Base Oil | ||||||||
32 | 135 @ 100° F | 5 gal. | Drum | -45° to 250° | Yellow | No | 0000000 | 0000000 |
Diesel Exhaust Fluid
For use in selective catalytic reduction (SCR) systems, this fluid reduces the air pollution from your diesel engine to help you comply with EPA guidelines. Commonly known as DEF, it contains urea to convert nitrous oxide (NOx) into water vapor and nitrogen for cleaner emissions. It meets ISO 22241-1 and American Petroleum Institute standards for diesel exhaust fluid.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Temperature Range, °F | Color | For Engine Type | Primary Chemical | Specifications Met | Certification | Each | |
Water Based | |||||||||
55 | Drum | 20° to 210° | Clear | Diesel | Urea (32.5%) | ISO 22241-1 | API Certified Diesel Exhaust Fluid | 00000000 | 0000000 |
Penetrating Lubricants
Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
Lubricants cannot be sold to the listed regions due to import regulations, product labeling requirements, or regulatory limits on VOCs (volatile organic compounds).
WD-40 stops squeaks, frees sticky mechanisms, loosens rusted parts, protects against corrosion, and displaces moisture.Optional spray bottle can be refilled with WD-40 from a can or drum.
LPS No. 1 Greaseless dries to form a lubricating film that resists dust, dirt, and oil. LPS No. 2 Industrial Strength leaves an oily film for long-lasting lubrication with up to a year of corrosion resistance.
CRC 3-36 cleans, lubricates, and displaces moisture. It forms a clear, thin film that protects against wear and corrosion.
Container | Each | ||||
---|---|---|---|---|---|
Size, gal. | Type | Temp. Range, °F | Cannot Be Sold To | Each | |
CRC 3-36 | |||||
5 | Drum | -50° to 250° | Outside United States | 0000000 | 0000000 |
Milling, Turning, and Sawing Lubricants
These lubricants reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. They are chlorine free for use where chlorine waste disposal is a concern.
Lubricants for use with cast iron, stainless steel, and steel will stain other metal. Use them at full strength or blended with other oil.
Use LPS Tapmatic lubricants at full strength. Tapmatic Natural is based on natural oil. It’s designed for use on steel and aluminum, but can be used on all metal. It is sulfur free.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Each | ||||
---|---|---|---|---|---|
Size | Type | Compatible With | Cannot Be Sold To | Each | |
LPS Tapmatic Natural | |||||
5 gal. | Drum | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | Outside United States | 0000000 | 0000000 |
Stamping and Drawing Vanishing Oil
Apply this oil to sheet metal up to 0.025” thick before stamping or drawing to extend die life. It quickly evaporates, leaving behind a thin, easy-to-clean film. It is chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength. It cannot be sold to the regions listed due to regulatory limits on VOC (volatile organic compounds).
Container | Each | ||||
---|---|---|---|---|---|
Size, gal. | Type | Compatible With | Cannot Be Sold To | Each | |
5 | Drum | Aluminum, Brass, Carbide, Cast Iron, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 0000000 |
55 | Drum | Aluminum, Brass, Carbide, Cast Iron, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 00000000 |
Powder and Flake Lubricants
Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity.
Powder lubricants get into hard-to-reach spots, such as locking mechanisms and fastener threads, better than flakes. Lubricant in a can and drum can be used dry or mixed with oil and grease to increase their load-carrying capacity or improve their ability to conduct heat and electricity.
Container | Each | |||||
---|---|---|---|---|---|---|
Net Weight | Type | Additive | Temp. Range, °F | Color | Each | |
Powder Lubricant | ||||||
50 lbs. | Drum | Graphite | -300° to 700° | Silver | 0000000 | 0000000 |
Metering Container-Mount Oil Dispensers
Equipped with a flowmeter/totalizer, this dispenser displays both flow rate and cumulative flow volume of the oil dispensed. Mount it to your drum of oil. It's smaller and more portable than air-powered container-mount dispensers, making it good for refilling gear boxes and transmissions. The container is not included.
For Container | For Max. Viscosity | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Max. Dia. | Max. Ht. | Oz. per Stroke | Oil Outlet Hose Lg., ft. | Material | Volume Measurement Scale | Max. Total Volume | Batteries Included | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Includes | Each | |
16 | 15" | 30" | 8 | 6 | Aluminum, Steel | Pints, Quarts, Liters, Gallons | 9,999 units | Yes | 460 | 140 | 7,750 | 7 | Cover, Curved Nozzle, Dolly, Meter, Oil Outlet Hose, Pump | 0000000 | 0000000 |
Container-Mount Oil Dispensers
These manual dispensers are more portable than air-powered dispensers.
For Container | Base | For Max. Viscosity | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Size, gal. | Oz. per Stroke | Oil Outlet Hose Lg., ft. | Overall Ht. | Lg. | Wd. | Material | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Includes | Each | |
B | 3.7 | 1 | 6 | 17 1/8" | 14" | 7 5/16" | Steel | 1,500 | 250 | 9,000 | 8 | Cover, Curved Nozzle, Drum, Oil Outlet Hose, Pump | 0000000 | 0000000 |
Air-Powered Container-Mount Oil Dispensers
Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum of oil (not included).
Air Inlet | For Max. Viscosity | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Container Size, gal. | Flow Rate, gpm | Max. Oil Outlet Pressure, psi | Oil Outlet Hose Lg., ft. | Material | Pressure, psi | Hose Lg., ft. | Thread Type | Pipe Size | Gender | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Includes | Each | |
55 | 1.8 | 540 | 6 | Aluminum | 40-180 | 6 | NPT | 3/8 | Female | 1,500 | 250 | 9,000 | 8 | Bung Adapter with a 2 NPT Male Connection, Pump, Air Inlet Hose, Air Pressure Regulator with Gauge, Oil Outlet Hose | 000000 | 000000000 |