We will reply to your message within an hour.
About half the strength of medium-strength steel nuts, these nuts are for light duty fastening applications.
Because they’re about 10% wider and taller than standard hex nuts, these heavy hex nuts distribute the load over a large area. Grade 2H nuts are comparable in strength to Grade 9 bolts.
These Class 10 nuts are about 25% stronger than medium-strength steel heavy hex nuts.
These nuts are designed to secure ASTM A325 bolts in structural joints. About 10% wider and taller than standard hex nuts, these heavy hex nuts distribute the load over a large area.
About half the strength of medium-strength steel coupling nuts, these nuts are for light duty fastening applications.
Made from Grade 5 steel, these inch-sized coupling nuts are suitable for most applications.
About half the strength of medium-strength steel square nuts, use these nuts in light duty fastening applications, such as securing access panels.
Also known as utility-pole nuts, these square nuts have a cupped shape that ensures a flush fit against curved surfaces and corners that bite into soft materials to resist loosening.
Secure and insulate round signal wire such as data and communication wire.
Use these flat staples to secure romex cable.
These curved staples snuggly hold round signal wire such as coaxial cable and telephone wire.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Use with hex nuts to connect threaded rod.
Add hardware to strut channel without having to hold the washer in place or reach inside the channel.
Notches on these washers grip the channel to keep them in place.
Keep hardware centered in the strut channel slot.
The strongest steel fittings we offer, these can withstand extreme-pressure applications.
The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.
Tighten these jam nuts against the turnbuckle body to prevent the fitting from loosening.
A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.
These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.
Create your own lifting eye by adding an eye nut to a stud or bolt.