We will reply to your message within an hour.
Combine posts, panels, and doors to create a barrier around equipment.
These panels lift on and off their posts in seconds, so you can protect machinery while providing access for maintenance.
Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.
Compact in size, these guards can be mounted directly to a machine or workbench. Panels are framed in aluminum T-slotted extrusions to provide multiple points of attachment for other components.
Combine rails, posts, and gates to make a custom guardrail system.
During light collisions, these guardrails tilt to absorb impact and minimize damage to a vehicle.
These guardrails sit low to the ground to protect racks and equipment without restricting access.
Start with two bases and then stack rails to the desired height.
These are the same guardrails you see along roadways.
This solid plastic bollard resists oil and chemicals and won’t rot from outdoor exposure.
Slip these covers over any bollard.
These bollards flex slightly when bumped by a vehicle to prevent dents and dings.
Restrict and grant access to an area—these bollards act as a strong physical barrier and have a hinge to fold flat against the ground in either direction.
Restrict access to an area of your facility.
Mount near a machine to deflect debris away from the immediate area. Guards swing in and out as needed.
Mount near a machine to deflect debris away from the immediate area. Guards bend and twist in any direction.
Protect personnel and equipment from debris with these portable panels.
Wrap these guards around grip pullers, presses, and other moving equipment to protect yourself from flying debris.
Modular mix-and-match components allow flexible railing configurations.
Slip these posts and rails together for a complete railing—no fittings required.
No assembly required with these one-piece railings.
Connect rails and posts with included slip-on fittings to quickly assemble a railing.
Combine bases, rails, gates, and toeboards to create a barrier customized to your needs. Base is weighted to allow installation without drilling holes.
Weighted bases allow you to install these railings without drilling holes.
A hook on each end lets you join multiple barriers to create the length and configuration you need.
Gates collapse for easy transport and storage.
Shield your robot arm from dirt and damage with these covers.
You can fill these with water for added stability and drain when not in use for easy transport.
The barricade with prismatic bands is high visibility for use in heavy traffic and low-light areas.
Cover robot arms and tools with this padding to help prevent injuries in areas where people are working nearby. When the padding is touched, pressure sensors signal your machine to stop moving.
Connect T‐slotted rails and reinforce joints for structural stability.
These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.
Add panels to T-slotted framing to create machine guards and strip doors.
Screw and nut sets or nuts secure brackets and other accessories to rails.
Slide drawers, panels, and doors with these tracks and rollers.
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.
Use hinges to add doors, lids, and machine guards to T-slotted framing.
Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.
Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.
Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches, workstations, and stands.
Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
Pivots provide smooth motion at the junction between two T-slotted rails.
Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.
Make your T-slotted framing workstation more ergonomic. These positioning arms let you move tools and other items within reach, reducing fatigue and streamlining repetitive processes.
Attach and position phones, tablets, monitors, and computer accessories on T-slotted rails.
Route wires, cables, and tubing along T‐slotted rails.
Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.
Bumpers and surface guards cushion doors and other moving parts to prevent damage and reduce noise.
For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.
Control static and ground T-slotted framing structures with these bonding and grounding components.
Close off openings in structures while allowing air to pass through.
Create posts of varying lengths.
Create strong structures by welding this framing together. Add metal panels to close off openings.
Securely fasten strut channel to the floor.
Provide a stable, nonmarring base for strut channel legs.
Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.
Mount strut channel away from walls.
Create continuous runs of channel without corners.
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
This welded, one-piece strut channel combines two strut channels side-to-side.
This welded, one-piece strut channel combines two strut channels back-to-back.
Slide the strut channel into the tube for telescoping length adjustments.
For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.
Roll components along strut channel hanging overhead.
Brackets mount on the outside of strut channel to allow trolley movement.
In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.
Keep a rod securely centered against the strut channel.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Connect two channels to create a stacked channel.
Push these nuts into place rather than threading them onto a fastener.
Serrated grooves grip the lip of the channel.
Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.
There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.
Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.
Quickly fasten threaded rod to strut channel. Snap these hinged nuts onto a threaded rod, then slip the head through a strut channel hole.
Quickly attach these nuts by twisting them closed at any point along a threaded rod.
A tab fits tightly against the lip of the channel to keep these nuts from slipping.
Keep hardware centered in the strut channel slot.
Add hardware to strut channel without having to hold the washer in place or reach inside the channel.
Use with hex nuts to connect threaded rod.
Notches on these washers grip the channel to keep them in place.
Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.
Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.
These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.
Attach strut channel at any point on a threaded rod without taking apart your assembly.
Cover rough ends of strut channel.
Position two strut channels at a 30° to 90° angle, then tighten the bolt to secure.
Support the corners of strut channel structures.
A tab on the end of these shelf brackets fits inside the strut channel for extra stability.
Provide smooth motion between two pieces of strut channel.
For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.
Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.
Support and protect conduit by mounting it to strut channel.
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
A flat or half-round shape keeps water from pooling on these strut rails. Unlike a traditional C-shape strut, these rails prevent the buildup of bacteria and debris, making them ideal for use in sanitary or food production environments.
Half the weight of steel, this aluminum framing resists corrosion in wet environments.
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.
To provide corrosion resistance in wet environments, this framing is galvanized.
Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.
Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.
In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.
Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.
Thick construction makes this framing strong and sturdy.
No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.
Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.
Build lightweight structures, such as light duty machine guards, enclosures, and carts, with framing that is twothirds the weight of aluminum framing.
Flush connections between rails and fittings give structures a clean finished look. Use this framing for stair rails, work platforms, and workstations.
Create secure but visible tool and stock rooms.
Due to the welded-wire construction these panels require fewer nuts and bolts, and won’t unravel if you need to cut around a pipe or other obstruction.
These complete partitions include everything you'll need.
Replace access door hinges with these switches; they actuate when the door opens at least 4°.
Often used with machine guards, these switches mount to a door frame.
Delay access to hazardous areas until conditions are safe; use these switches with machines that take time to stop after they are turned off. They mount to a door frame.
Light beams travel up to 32 ft. between the transmitter and receiver.
Scanning 275° side-to-side for people and objects, these switches (known as safety laser scanners) cover large areas and send signals to machinery to prevent accidents.
Control and diagnose issues with safety-critical circuits.
Hang your human-machine interface and swivel it around to save floor space and comfortably access touch screens, buttons, and other operating equipment.
Block chips while maintaining an unobstructed view of the workpiece.
These guards mount and travel on the cross slides and are fully adjustable in all directions.
Shield couplings and bearings from dirt and debris while protecting fingers and tools from moving parts.
Extend the life of your rigid shaft couplings by blocking out dirt, water, lubricants, and other contaminants. These two-piece covers twist together to form a shell around the coupling.
Add a crossbeam for hanging lifting equipment, creating overhead conveyor systems, and supporting structural applications.
Join two beams in a straight line.
A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.
Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.
These clamps have a fixed hanger for rigid connections.
Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.
A toothed clip secures these clamps to the beam—no fasteners required.
Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.
Also known as purlin clamps, these clamps are shaped to fit around beams that have a 45° or 90° lip.
These clamps rotate 360° and pivot 45° to ensure the rod hangs straight, even on sloped beams.
For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.
Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material.
Support strut channel at a right angle to the beam.
Organize multiple lines of pipe, tubing, or hose with a single clamp. They are polyethylene for good chemical and UV resistance.
For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.
Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.
Quickly mount parallel lines of pipe, hose, or tubing by clicking them into these clamps. Made of acetal, they are UV-resistant and can be used outdoors.
For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.
Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.
Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.
Join these clamps together to line up multiple pipes, cables, or tubes side-by-side, even when they are different sizes.
Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.
For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.
Route pipe, tubing, and conduit across strut channel.
Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.
Hold pipe, tubing, and conduit away from strut channel.
For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.
Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.
Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.
Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.
For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.
Secure two pressurized hydraulic lines with a single clamp. Mount these clamps directly onto rails, no adhesive or welding required. They fit tightly around the lines to reduce vibration.
Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.
For a more secure connection than rail- and adhesive-mount clamps, weld the bottom plate of these clamps onto your rails. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.
Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.
A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.
Customize these clamps to any object—they have a bend-and-stay design so you can mold them to the size and shape you need. Made of plastic-coated 316 stainless steel, they withstand abrasion, corrosion, and UV rays.
For a strong, secure connection, mount these hangers by welding them to a rod.
Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.
Heavy duty construction adds strength for higher load capacities than other positioning arms.
Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.
Bend these arms to hold small equipment such as lights and microphones in almost any position.
Position small panels and displays with these compact arms.
Ball-and-socket connections allow 360° positioning.
With strength for higher load capacities than other ball-grip positioning arms, these arms have a heavy duty construction.
A suction base makes it easy to move and attach these arms to smooth surfaces such as glass and polished metal.
Reduce hand fatigue in continuous fastening and grinding applications. Arms are counterbalanced to support the full weight of the tool as well as absorb torque.
Stand panels up to create enclosures without sinking posts into the ground.
Cover standard or flange-mount bearings to protect personnel from injury and keep contaminants out.
Weld these caps and targets to the ends of posts to create stackable shelving and racking systems.
Verify machine guard openings are sized to prevent hands and fingers from reaching hazards. These gauges check whether a machine guard complies withOSHA, CSA, or ANSI requirements.
Elevate robot arms with these bases so they can reach onto raised surfaces, such as conveyor belts or workstations.
Protect conveyed material from dust, debris, and other contaminants.
Keep small items moving smoothly down a roller conveyor. These guards cover the gap between rollers so items don’t fall through or get jammed.
Lock the nose into the retracted position by pulling the handle and rotating it 90°.
An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.