We will reply to your message within an hour.
These slides fully extend for convenient access to the back of drawers.
Half the length of other drawer slides we sell, these slides install in small-parts cabinets.
The stacked design provides stability for deep and wide drawers.
Slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet.
A lever locks the drawer in the open as well as closed position; push the lever to release the lock.
These slides automatically pull the drawer closed when it approaches the closed position.
When you push on the drawer, these slides force the drawer open.
These slides provide full extension for convenient access to the back of your drawers.
With fewer moving parts than other lock-open drawer slides, these collect less debris for a longer service life.
The size of a finger, these tiny slides open in both directions. All have ball bearings for smooth operation.
Open drawers from either side of a cart or cabinet—these slides let drawers pass through for two-way access to contents.
A stop holds the drawer open; push firmly on the drawer to close.
When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawer.
To prevent drawers from slamming shut and support them even if they’re tall and full of heavy equipment, these steel slides have soft-closing bumpers and mount to the top and bottom of drawers.
These slides gradually slow the drawer's motion to prevent it from slamming open.
Mounting to the tops and bottoms of drawers, these steel slides support drawers even if they’re tall and hold heavy equipment.
A stop holds the drawer closed; pull firmly on the drawer to open.
Mount these slides underneath countertops, desktops, shelves, and tables. They are often used to hold keyboard trays.
No need for drawer slides or roller track—add rollers to wood cabinet drawers and doors for smooth operation.
Slide drawers, panels, and doors with these tracks and rollers.
Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.
Slides have a row of ball bearings on each side of the rail.
With a row of crossed-roller bearings on each side of the rail, these slides have over twice the load capacity of standard low-friction slides and are better for handling shock loads.
Create your own positioning table or telescoping slide. Sets include four rails, two roller bearing cages, and eight end stops.
These tiny carriages and guide rails are sized for electronic and other precision applications.
Small enough to fit in a camera zoom lens and other precision motion applications, these carriages and guide rails have a black chrome-plated finish that diffuses light to prevent reflecting light from causing equipment to malfunction.