We will reply to your message within an hour.
The pleats create a large surface area for filtering without reducing airflow.
Select the dimensions you need for custom-sized frames.
A compound inhibits mildew and mold growth.
These filters are typically used as replacements in HVAC equipment.
The filter material extends beyond the frame for a tight fit, creating a seal to prevent air from bypassing the filter around its edges.
A compound inhibits mildew, mold, and fungi growth.
Stop unfiltered air from passing between panels or around filter tracks.
Create a custom-sized filter or protective layer for expensive filters.
A thick-gauge metal frame makes these filters more durable than other reusable filters.
These washable, durable filters are made to your dimensions.
Also known as metal mesh filters. These filters can be washed and reused.
These filters are built to withstand higher temperatures than other metal panel air filters.
Magnetic strips on the back of the frame make these filters easy to install and remove.
An inherent electrostatic charge attracts dust and particles to these filters.
Rated MERV 11, these filters capture particles down to 1 micron.
Rated MERV 13, these filters capture particles down to 0.3 microns.
With tight pleats, these filters have a larger surface area than filters with standard pleats for improved efficiency and an even longer life. These filters strike a good balance of filtering efficiently while allowing airflow, making them a more cost-effective option than higher rated filters.
Eliminate heavy odors with these filters that have 30 times the odor removing ability of standard odor-removal air filters.
Carbon granules in these filters remove odors. They are pleated to maximize filtering surface area without reducing airflow.
Clear the air of fine particles and odors caused by high levels of pollution, such as wildfire smoke.
Hold panel filters in place.
Use in exhaust hoods to remove grease and oil from the air.
Cut these rolls to the size you need.
Cut these pads to the size you need.
These rolls are an economical choice for protecting more expensive filters that catch finer particles.
These pads are an economical choice for protecting more expensive filters that catch finer particles.
Cut these washable, reusable rolls to the size you need.
Wash and reuse these pads. Cut to the size you need.
Determine the right pores per inch for your air filtering application—you'll receive several small samples with different pores per inch.
Wrapped in aluminum mesh for added support, these filters can be used without a frame.
Designed for use with electronic equipment, these pads can withstand prolonged exposure to heat and humidity.
With a higher carbon concentration than odor-removal air filter rolls, these pads handle heavier odors.
Carbon granules inside these filters remove odors from the air. Cut them to the size you need.
Replace the filter roll in your automatic filtering equipment.
Add support to filter rolls and pads that have been cut to size.
Control dust and contaminants in hospitals, laboratories, and other demanding environments. These filters capture particles down to 0.3 microns.
The rigid frame on these filters withstands fluctuations in airflow, such as those created by variable air volume systems.
Multiple panels maximize filtering surface area for long service life.
The deep pockets on these filters maximize filtering surface area with minimal airflow resistance.
Apply this coating to clean filters to create a surface that better retains dust and particles than untreated filters.
Prevent air from bypassing your filter. These filters are self-sealing thanks to the filter material that fully encloses the metal frame.
Mount these cleaners to workbench tops to remove odors and fumes from the air.
Eliminate static buildup while cleaning air.
Mount these air cleaners to your bench top and adjust the arm to your desired position.
Filtering away dust and particles, these hoods create a clean space for demanding work, such as bioprocessing, pharmaceuticals, electronics, and optics.
Carry these small cleaners to job sites to remove odors and dust from the air.
Carry these cleaners to job sites to remove odors and fumes from the air. Use the hose to direct cleaning.
Larger than portable air cleaners, these air cleaners roll to where you need them.
Roll this air cleaner to the contaminant source or place it on a bench top.
Often used in machine shops, these cleaners remove oil and coolant mist from the air.
Purify the air in spaces with light cleaning needs.
Save floor space—cleaners mount in a T-bar style ceiling.
Remove viruses, bacteria, dust, and other particles from the air.
Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.
Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.
Use these filters to extend the service life of air-powered tools and then throw them away when you're done.
Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.
Assembled, inspected, and packaged in a clean environment, these filters come sealed in anti-static double bags.
Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.
A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.
The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.
An automatic drain discharges up to 300 gallons per hour to handle compressed air with high moisture content.
Mount these filters to a 35 mm DIN rail with the included brackets.
Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Parker modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your ASCO Numatics modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.
Also known as coalescing filters, these filter elements fit in ASCO Numatics modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.
These filter elements fit in ASCO Numatics modular two-stage compressed air filters to remove water droplets, oil, and particles as small as 0.01 microns.
Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.
Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.
Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.
Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.
A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.
Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.
Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.
Replace a damaged bowl, or change the bowl material or drain type on your SMC modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your Wilkerson modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your Norgren modular compressed air filter.
Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.
Replace a damaged bowl, or change the bowl material on your ASCO Numatics modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your ARO modular compressed air filter.
Generate clean air for instrumentation and applications with critical air requirements.
Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.
Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.
Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.
Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.
No need to buy and service two filters—these filters have a single element that removes both large and fine particles.
Replace failing or lost O-rings in SMC modular compressed air filters.
Replace failing or lost O-rings in ASCO Numatics modular compressed air filters.
Replace failing or lost O-rings in Wilkerson modular compressed air filters.
Replace failing or lost O-rings and gaskets in Norgren modular compressed air filters.
Replace failing or lost O-rings in Festo modular compressed air filters.
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.
Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.
A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.
A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.
No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.
Mount these filter/regulators to a 35 mm DIN rail with the included brackets.
Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment.
An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Connect SMC modular filter/regulator/lubricator components with the same series number.
Connect Norgren modular filter/regulator/lubricator components with the same series number.
Connect Parker modular filter/regulator/lubricator components with the same series number.
Connect Wilkerson modular filter/regulator/lubricator components with the same series number.
Connect Festo modular filter/regulator/lubricator components with the same series number.
Connect ARO modular filter/regulator/lubricator components with the same series number.
Connect ASCO Numatics modular filter/regulator/lubricator components with the same series number.
An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.
With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.
No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.
Swap out Norgren modular filter/regulator/lubricator components without unthreading your air line connections.
Swap out Wilkerson modular filter/regulator/lubricator components without unthreading your air line connections.
Swap out Festo modular filter/regulator/lubricator components without unthreading your air line connections.
Swap out ARO modular filter/regulator/lubricator components without unthreading your air line connections.
Prevent accidental start-up when servicing equipment.
Filter and lubricator in one, these filter/lubricators provide clean, lubricated compressed air to extend the service life of tools and equipment.
Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.
Use these dryer/filters to protect air-powered tools from water, oil, oil vapor, and particles, then throw them away when you're done.
These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.
With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators.
Each of these filter/dryers has two desiccant towers—one that absorbs moisture, particles, and oil in the air while the other reactivates saturated desiccant so you have an uninterrupted supply of clean, dry compressed air.
Install these dryers just before air-powered tools as final protection from water and particles and throw them away when you’re done.
Once aftercoolers and separators have removed the bulk of the water, use these dryers to remove any remaining moisture in your air line.
For use with Norgren modular compressed air systems, once aftercoolers and separators have removed the bulk of the water, use one of these desiccant-filled dryers to remove any remaining moisture in your air line.
Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.
Cool air through refrigeration to condense water vapor.
These all-in-one dryer/filters eliminate the need for individual dryers, separators, and filters. They cool air through refrigeration to condense water vapor for removal.
A float-operated drain valve on these separators automatically opens when the bowl begins to fill. The first step in water removal, use one of these separators to remove the large amount of water as compressed air cools.
These separators have higher flow rates compared to our other compressed air separators. Prevent equipment damage and wear caused by moisture in your compressed air supply. The first step in water removal, use one of these separators to remove the large amount of water created as compressed air cools.
In addition to removing large amounts of water, these separators also remove particles and oil droplets. Place them after your compressor and aftercooler, or at the point of use in applications that don't require an aftercooler.
When water is condensed out of a compressed air system, it contains oil from the compressor that makes disposal difficult. These separators use two-stage filtration to reduce oil content to below 20 parts per million.
Get clean, dry air wherever you need it. The separator, filter, and dryer mounted on these tanks clean and dry compressed air as you fill it. Once full, move the tank to your workspace on its pneumatic wheels.
Quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. Also known as quick exhaust valves.
Control the flow of exhaust air while also regulating the exhaust air speed. These valves dump exhaust air to the atmosphere without routing it back through a directional control valve. The 90° elbow shape allows you to install them in tight spaces. Also known as quick exhaust valves.
Quickly vent exhaust air to the atmosphere or divert it to another place in your system to speed up the movement of equipment. The 90° elbow shape allows you to install them in tight spaces. Also known as quick exhaust valves.
A muffler reduces exhaust noise. Valves allow airflow into your equipment and then quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. Also known as quick exhaust valves.
Install these valves in the exhaust ports of air directional control valves to control exhaust air speed without needing access to your cylinder.
Choose the pressure range you need. When these valves receive an air signal, they quickly dump exhaust air to the atmosphere without routing it back through a directional control valve to speed up the movement of equipment. They're often used with air compressors that require continuous operation. Also known as quick exhaust valves.
Stop dust and other contaminants from entering your process and equipment. Use these filters on blowers, compressors, engines, and in hydraulic systems.
Clean the air going into small blowers and air-powered equipment in tight spaces.
Made of polypropylene, these filters can be used in damp environments where corrosion is a concern.
With a threaded connection on both ends, these filters can be installed anywhere in your pipeline to keep dust and debris out of your system.
Typically used on vacuum pumps, these filters ensure that clean air is going in and coming out of your system.
Install these filters between your high-vacuum chamber and the inlet of your pump to remove dust, water vapor, and other contaminants from the system and protect the pump. Commonly used in vacuum-furnace and coating applications, they have a polyester filter element that traps particles as small as 5 microns.
These filters have a clear housing so you can monitor collecting debris without stopping flow.
Use one of these compact filters in a tight spot, or combine up to ten for a manifold application.
Improve vacuum system efficiency and protect components from moisture—these separators remove over 90% of water from air.
Stop oil mist and smoke from exiting your equipment and into your environment. These exhaust filters are commonly used with small oil-sealed vacuum pumps.
To keep airborne oil and odor out of your work environment, connect these filters to your high-vacuum oil pump. They purify pump exhaust in two stages: a fiberglass layer captures oil and collects it into a drain, and an active carbon layer removes any odor-causing oil or chemical vapors.
Clamp these exhaust filters onto oil-sealed, high-vacuum pumps to remove oil, smoke, and other contaminants and keep workplace air clean. Once captured, the oil returns to the pump to be reused.
Purify exhaust fumes while silencing the noise from your oil-free high-vacuum pumps.
Use in applications up to 300 psi.
Remove small particles in lines that reach up to 5,000 psi to protect sensitive equipment, such as hydraulic controls.
Capture oil, oil vapor, and other contaminants from your pump to prevent them from spreading into your high-vacuum system.
Designed for high-purity applications, these filters are cleaned and bagged individually to prevent contamination. Use in applications up to 100 psi.
Remove contaminants, moisture, and other particles from steam that will touch food and for final filtering in pharmaceutical, biotech, and electronics applications.
Remove contaminants from culinary steam—steam that sanitizes food and beverage processing equipment—with these corrosion-resistant filter housings.
Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.
Commonly used with high-flow, air-powered equipment, such as diaphragm pumps and valves, these mufflers reduce noise and filter exhaust fumes without restricting flow.
A small hex size makes these high-flow mufflers a great fit for cramped spaces.
These mufflers can be cleaned for an extended service life.
In addition to a filter, these mufflers have a wool felt disc to trap oil mist.
Replace your muffler less often—these have a filter design that stays clean longer than porous mufflers.
Made entirely of stainless steel, these mufflers stand up to harsh, corrosive environments.
With a threaded connection on both ends, these mufflers can be installed anywhere in your line.
Also known as reclassifiers, these mufflers have a clear reservoir with a drain plug to remove and store oil mist for reuse.
These mufflers exhaust through narrow holes on one end to provide a concentrated blast of air. Use them to eject items from your conveyor and direct exhaust away from delicate applications.
Adjust the flow by turning the screw. Use these mufflers with air-powered tools and cylinders to reduce noise and filter exhaust fumes.
Install these mufflers in air-powered drills and other loud equipment. They filter exhaust fumes and reduce noise by 30 dB, a reduction that's equivalent to putting in earplugs.
Suitable for use with welding equipment, these mufflers are made of flame-resistant materials. They reduce noise by 35 dB.
Don’t let an unexpected clog interrupt your work. These mufflers have a filter that slides up slowly as it clogs to indicate when the muffler should be replaced. They reduce noise by 30-35 dBA
With a threaded connection on both ends, these mufflers can be installed anywhere in your line. They reduce noise by up to 45 dB.
Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks.
These breather vents withstand corrosion in damp environments.
Shield outdoor pipe and tank openings from the environment. Also known as vent caps, these breather vents have screens to allow air flow while blocking debris.
Keep moisture, dirt, and debris from entering your oil reservoirs.
These breather vents are rated NEMA 6 to withstand periodic submersion in water.
Minimize moisture buildup in enclosures. Also known as drain plugs, these breather vents have a small outlet that allows condensation to drain.
Add a filling port to your hydraulic tank while protecting against excess pressure and vacuum.
Secure access to vented openings in pipe and tanks—the cap can be locked to prevent tampering.
Separators remove 99% of particles from air, gas, and steam lines and have no filter cartridges or baskets to clean and replace.
Extract the dust from your blasting cabinet to increase effectiveness and improve visibility.
Separate dust from your abrasive media as it's collected so you can reuse the media.
Mount on pedestal grinders for easy dust collection
Connect these dust hoods to your vacuum system to contain and remove dust and fine particles while grinding or cutting.
Replace filters or add parts baskets and drum dollies to your parts cleaning vacuum/blowers. All of these filters and accessories can be used with compatible MiJET parts cleaners.
Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts.
When you need to replace your dust collector’s bag or cartridge, match up the specs to one that we have.
Use these components to put together a duct system to collect sawdust, chips, shavings, and granular material from woodworking operations.
The cartridges in these collectors are 98% efficient for particles 1 micron and larger—great for picking up fine dust such as graphite and talc.
Move large quantities of air and dust through longer runs of pipe than the drum-mount dust collectors. This powerful unit separates most waste material in the airflow and deposits it into a dust storage barrel. These collectors are 99% efficient for particles 5 microns and larger.
Collect wood dust with these simple yet effective dust collectors. The base has wheels, so you can move the unit around for connection to different equipment. These collectors are 95% efficient for wood dust particles 25 microns and larger.
Mount these powerful units on a drum for two-stage collection. In the first stage, larger particles fall into the drum; in the second stage, smaller particles go into the filter bag, resulting in less wear on the blower and filter bag. These collectors are 99% efficient for particles 10 microns and larger.
The arm length adjusts from 3 to 6 feet making these exhaust hoses good for locations with low ceilings.
For exact positioning, these hoses swivel 360°.
Move the hose into position and the support arm will hold it in place.
Remove fumes, vapors, and fine dust particles from your space.
Position these exhausters above drums, tanks, and distillers.
Mount these exhausters to the floor to remove fumes, vapors, and fine dust particles from your space.
In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor.
This fume exhauster has a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G locations. Use it to remove fumes, vapors, and fine dust particles from your space.
These filters fit over fans with round guards to trap dust and debris, keeping contaminants out of the air and off of your fan.
These vents have louvers with foam filters to keep out dust and falling liquids.
These vents maintain air pressure inside enclosures that may be exposed to indoor and outdoor temperature changes while keeping dust and water out.
Safe for use around flammable and combustible gases, vapors, fibers, and dust, these vents allow air to flow through enclosures to maintain consistent pressure and reduce moisture buildup as temperatures change. They also stand up to washdowns.
Use these vents to maintain consistent pressure as temperatures fluctuate by allowing air to flow through sealed enclosures.
Rated NEMA 4X, these vents provide protection from washdowns, corrosion, and power jets of water.
No threaded hole or tools needed—snap these vents into enclosures with a maximum 1/8” panel thickness to let airflow in and keep water out even when submerged.
Attach these vents to the top or side of sealed enclosures, so air can flow through to equalize internal and external temperature and pressure.
These conductive aluminum screens block electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent electrical problems such as radio static and faulty signals. Made of mesh, they let air flow through, so the pressure in your enclosure stays constant as temperatures fluctuate.
Full-face coverage shields eyes from liquid splashes and irritating vapors. Replace the cartridge and/or filter when breathing through these respirators becomes difficult.
Replace the cartridge and/or filter when breathing through these half-face respirators becomes difficult.
Designed to fit easily under welding helmets. Replace the filter when breathing through these respirators becomes difficult.
As you breathe through them, these respirators filter out contaminants in the air. Throw them out when soiled, damaged, or breathing is difficult.
Slip on this mask for protection from dust irritation.
When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 hood that protects against light liquid splashes.
The portable pump on these respirators provides a continuous supply of clean air for one person.
Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles.
Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles.
These respirators have a chemical-resistant Tychem 2000 hood that protects against light liquid splashes.
Stick these masks directly to your face to create a full seal around your nose and mouth, without the need for often painful ear or head straps. Since they conform to the shape of your face, these masks help prevent the fogging that can occur with traditional face masks, making them good for those who wear glasses.
These mobile respirators filter contaminants to deliver breathable air without the need for an air line connection. The pump sits on your back to allow unrestricted movement, so these respirators are often used in welding, painting, and pharmaceutical applications.
When working in confined spaces near hazardous chemicals, be prepared for an Immediately Dangerous to Life or Health (IDLH) atmosphere. Commonly stocked in labs, industrial facilities, or on gas lines, a worker can quickly strap on this apparatus for 30 minutes of breathable air.
These masks are lightweight and easy to breathe through.
An alternative to disposable face masks, these protective masks can be washed and reused multiple times.
The most efficient spray booth filters we offer, these filters are made of polyester for moisture resistance.
These economical filters hold contaminants while allowing proper airflow.
Use this valve with oil, diesel fuel, gasoline, and kerosene.
Body is brass.
These valves are made of corrosion-resistant materials for use in wet conditions and harsh environments.
For excellent corrosion resistance in wet conditions and harsh environments, these valves have no metal parts.
Turn the key to manually vent radiators and heaters.
An internal wire brush traps air bubbles and discharges them through the top relief port while allowing inline flow from the inlet to the outlet.
Our only air-release valves for steam, these seal shut when steam enters the valve to prevent system contents from escaping through the relief port.
Eliminate air pockets in your drinking water system with these valves. They meet NSF/ANSI 61, which designates them as safe to use with drinking water.
Produce a stream of air down a doorway or other opening to keep out dust, dirt, insects, and fumes while allowing personnel to pass through.
Pair these hoods with an exhaust system to contain harmful fumes, vapors, and gasses while venting them away from work spaces—they protect users from inhaling or coming in contact with them.